HomeTrescott
Plainfield Neighborhood

Window Treatment in Trescott, Plainfield, IN

Custom Plainfield window treatment crews serving Trescott homeowners with free in-home measure, repair, replacement.

Call (317) 999-5154Get Free Assessment
Quick Answer

These answers cover work in this section of Plainfield. It's a mix of house ages, which means the mount decision changes house to house rather than following a rule you could apply from a map.

  • Services: faux wood blinds, wood blinds, vertical blinds, aluminum mini blinds
  • Service area: Trescott, Plainfield, IN and surrounding areas
  • The measure is bookable soon. Fabrication is the fixed cost in time, generally two to five weeks and longer on specialty shapes. If you have a date you're working toward, tell us at the measure and we'll be straight about it.
  • Insured and bonded
  • Serving Plainfield, IN since 2008
About Trescott

Local Window Treatment Experience in Trescott

A resident saying they live in Trescott hasn't told us which house they own. Drees and Pulte are working the same 378-lot plat under one name, which means two plan catalogs, two window packages and potentially two different return depths inside one subdivision. That's the first question we ask, ahead of square footage and ahead of room count. Drees plans here run 2,300-plus to 3,000-plus sq ft and list from $423,900 to $568,900, above The Landings at Hobbs Station at $372,990 and well above Bo-Mar Estates in the $200,000s. The window budget follows the plan catalog, not the entrance sign.</p><p style="font-size:16px;color:#4a5a6a;line-height:1.75;margin:16px 0 0">The second Trescott specific is the lot geometry, and it's unusually useful because it's published rather than guessed. R-3 minimums are 80 by 125 feet and R-4 minimums are 62 by 125. Both are deep and narrow, so the house presents a short elevation to the street and a long one to the neighbor. On a 62 foot lot the house next door is close enough to be the primary shade source on your side windows, which changes the openness factor you want on that elevation and makes lower half privacy the governing problem rather than glare. It also means side elevation shading changes the day the adjacent lot finally builds.

We have served Trescott homeowners through the full range of window treatment needs, from inspections and repairs to full replacements. Whatever the system, our Plainfield crew approaches every project with clear communication and respect for your property.

The Housing Here

Trescott housing: 378 lots, 167.3 acres, two builders under one name

Primary plat PP-21-140 records 378 lots on 167.3 acres, and the subdivision is rolling out in phases that are being platted incrementally. That has a consequence people underestimate: early and late sections will differ in specification even under one name, because builders revise plan sets and window packages between phases. Drees product is documented from 2,300-plus to 3,000-plus sq ft with named plans including Parkette, Buchanan, Alden, Ayden and Dawson. Pulte's share of the plat isn't separately broken out in any source we could retrieve, so we don't print a split. Overlook and Gardens are the two named sections, and residents name the section as well as the subdivision.

The lot minimums are the rare published figure: 80 by 125 feet in the R-3 portion, 62 by 125 in the R-4. Multiply that out and the spacing between houses stops being a guess. Story mix isn't separately published, but the Drees plan set at 2,300-plus to 3,000-plus sq ft is predominantly two story with ranch options, and the larger plans can carry a two story family room volume. Pricing from the upper $400,000s sits well above Plainfield's $280,600 median owner occupied value, which is consistent with a section that behaves as a separate tier from the town as a whole.

Built
Active new construction as of 2026, phased and platted incrementally across 167.3 acres
Homes
378 lots under primary plat PP-21-140. The Drees and Pulte split isn't published, so we confirm the builder at the appointment
Typical size
Drees product 2,300-plus to 3,000-plus sq ft, listed at $423,900 to $568,900. Lot minimums 80 by 125 feet in the R-3 portion and 62 by 125 feet in the R-4
Styles
Drees Homes and Pulte Homes production elevations, predominantly two story with ranch options
What It Means For Your Windows

Trescott windows: two catalogs, narrow lots, a rolling settlement gradient

Expect 20 to 30 openings on the Drees product, scaling with plan, from Parkette at the smaller end up through the 3,000-plus sq ft plans. The count isn't the hard part. The hard part is that two builders on one plat means two separate window specifications, so the return depth on a Drees house and a Pulte house in Trescott aren't necessarily the same number, and a schedule built from a neighbor's order will be wrong. We establish the builder first, then measure depth at the head on each opening type in your plan. Only the larger Drees plans at 3,000-plus sq ft are likely to carry a two story family room volume, and those change the whole conversation about reach and stack height.

Squareness at Trescott is a moving target by design. The phases plat incrementally, so a section finished three years ago has settled while the current phase is still green, and the subdivision will hold a rolling gradient of settlement for years. We three point measure every opening: width at the head, at the middle and at the sill, then height at both jambs and again at the center. The factory works from the narrowest width and deducts 1/16 inch per side. On an opening a quarter inch out of square, that deduction hands the difference back as light gap at the wide end, on top of the 3/4 inch per side Lutron publishes for an inside mount roller in the 20/64 range.

A 62 foot lot makes your neighbor the shade

R-4 minimums here are 62 by 125 feet, so the house next door sits close enough to be the primary shading element on your side elevations. That changes the brief. On those windows the problem is privacy at the lower half of the glass rather than solar load, so 5 or 10 percent openness reads fine and top down bottom up beats a plain roller. Shading also changes the day the adjacent lot builds.

Two builders, two window packages, one name

Drees and Pulte are both working plat PP-21-140. Each specifies its own window package, so casing and return depth can differ between the Drees and Pulte sections even though the sign at the entrance says one thing. We won't quote a Trescott house from a Trescott neighbor's order. Tell us the builder and the plan name, Parkette or Buchanan or one of the others, and we start from the right catalog rather than the right subdivision.

Two story family room volumes on the larger Drees plans

The Drees plans at 3,000-plus sq ft can carry a two story family room, and that's where stack height stops being an abstraction. A shade parked at the top of tall glass takes real inches of daylight, and on stacked units that stack sits where the view is. We mount above the header where the reveal allows it, and on anything 120 inches or taller you should expect larger light gaps, which Lutron flags for tall shades and for a 4:1 height to width ratio.

Deep and narrow lots put the long wall toward the neighbor

Both lot classes at Trescott are 125 feet deep against an 80 or 62 foot frontage, so the house shows a short face to the street and a long face to the side. Most of your glass ends up on the side elevations, and most of that glass looks at a wall rather than a view. That argues for splitting the specification by elevation: a real solar product front and back where openness matters, and a privacy first product down the long sides.

What We Specify Here

What we specify most in Trescott

Trescott gets specified by elevation rather than by room, which is unusual, and the published lot dimensions are why. With 125 feet of depth against 80 or 62 feet of frontage, the front and rear openings face open ground while the side openings face a neighbor twenty odd feet away. So the front and back get products chosen for solar and view, and the sides get products chosen for privacy and light control. The upper $400,000s price point supports hardwood where a townhome section wouldn't, and the two story family room volume on the larger Drees plans is a drapery and motorization conversation rather than a blind conversation.

Top down bottom up cellular shades

The right answer for the long side elevations on a 62 by 125 foot R-4 lot, where the neighbor is close and the problem is privacy at eye level rather than solar gain. Dropping the top rail lets daylight over the head while the lower half stays covered. DOE and Oak Ridge National Laboratory testing found cellular shades saved up to 20 percent of heating energy against a bare window, which counts in Climate Zone 5A. Cordless lift throughout.

Hardwood plantation shutters

For the front rooms on the street elevation, where the upper $400,000s Drees plans carry the trim detail to justify them. Specify a divider rail so the top and bottom louvers operate independently, and use a wand tilt rather than a visible tilt rod on the street side. One caution: hardwood moves with humidity, so we put composite in the baths and anywhere over a sink. National shutter pricing runs $175 to $800 per window.

Custom drapery and top treatments

The two story family room on a 3,000-plus sq ft Drees plan is a wall, not a window, and hard treatments alone leave it reading as separate units. A traverse rod with proper return and overlap ties the run together, and stationary panels give scale to the upper volume without covering the glass. National custom drapery runs $300 to $4,000 per window, so we scope this one room at a time instead of whole house.

Exterior solar shades

Trescott is 167.3 acres of former open ground with no canopy at all, and a 125 foot deep lot usually puts a patio on the rear elevation with nothing shading it. An exterior solar shade cuts heat before it reaches the glass, which no interior product can do, and it makes the patio usable through a July averaging an 85.2F high. Retractable awnings do the same job differently, at a national installed range of $1,000 to $6,000.

Getting Around

Getting around Trescott

Trescott sits southwest of the Hadley Road and County Road 675 East intersection, on 167.3 acres that were open ground until this plat. There's no established canopy here at all, which is a real difference from Hickory Woods, where mature trees and generous spacing between homes give a settled feel newer developments can't replicate. Residents name the section as well as the subdivision, Trescott Overlook or Trescott Gardens, and it's worth telling us which. Schools are Plainfield Community School Corporation: elementary by address, then Plainfield Community Middle School and Plainfield High School. The corporation is coextensive with Guilford Township, so the district boundary doesn't follow the town boundary.

Streets we work on
Hadley RoadCounty Road 675 East
Around the neighborhood
the Hadley Road and CR 675 East intersectionthe two named sections, Trescott Overlook and Trescott Gardens
Plainfield Community School Corporation
Plainfield Community School Corporation elementary by addressPlainfield Community Middle SchoolPlainfield High School
Services

Window Treatment Services in Trescott

Every service Plainfield Window Treatments offers across Plainfield is available to Trescott homeowners.

Faux Wood Blinds in Trescott

Moisture stable slats for post war ranches and new townhome returns

Learn more →

Wood Blinds in Trescott

Basswood for the rooms where the casing was chosen

Learn more →

Vertical Blinds in Trescott

One piece coverage for the door everybody actually uses

Learn more →

Aluminum Mini Blinds in Trescott

Low cost slats for the openings nobody photographs

Learn more →

Roller Shades in Trescott

Clean fabric lines for square, casing free new construction

Learn more →

Solar Shades in Trescott

Glare control for pond frontage, open farm edges and trail lots

Learn more →

Cellular Shades in Trescott

Honeycomb insulation for a climate with two real seasons

Learn more →

Zebra Shades in Trescott

Sheer and solid bands on one tube, squareness required

Learn more →

Roman Shades in Trescott

Soft fabric for tall period openings and all brick front rooms

Learn more →

Woven Wood Shades in Trescott

Natural weaves for tree cover, trail frontage and sunrooms

Learn more →

Blackout Shades in Trescott

Real darkness comes from the hardware, not the fabric

Learn more →

Plantation Shutters in Trescott

Built to the opening's real geometry, not to a rectangle

Learn more →

Cafe Shutters in Trescott

Privacy at eye level, daylight kept above the rail

Learn more →

Motorized Shades in Trescott

Two story reach and one touch operation, batteries disclosed first

Learn more →

Custom Drapery in Trescott

Fullness and stack back measured against the wall, not the window

Learn more →

Valances & Top Treatments in Trescott

A finishing line above the glass, with no functional claims

Learn more →

Exterior Solar Shades in Trescott

Sun stopped outside the glass, covenants read first

Learn more →

Retractable Awnings in Trescott

Shade over the patio, retracted before the wind arrives

Learn more →

Commercial Window Treatments in Trescott

Storefront glass and break rooms specified separately

Learn more →

Skylight Shades in Trescott

Tensioned channels and a charging plan for glass you can't reach

Learn more →

Sliding Glass Door Blinds in Trescott

Stack lands off the panel you actually walk through

Learn more →

Panel Track Blinds in Trescott

Flat panels for long low glass, stack side chosen once

Learn more →

Sheer Shades in Trescott

Daylight kept, sightline blocked, darkness not included

Learn more →

Pleated Shades in Trescott

One thin layer, no air pocket, and we'll say so

Learn more →

Bamboo Shades in Trescott

Natural weave, real texture, and light through every gap

Learn more →

Dual Shades in Trescott

Banded fabric on one tube, mounted to level not header

Learn more →

Top-Down Bottom-Up Shades in Trescott

Sky kept, sightline gone, two lift paths to maintain

Learn more →

Cordless Blinds in Trescott

No loose cord, and a spring that ages honestly

Learn more →

Hardwood Shutters in Trescott

Basswood where the trim was chosen, composite where water lives

Learn more →

Composite Shutters in Trescott

Water safe panels, with the width limit stated first

Learn more →

Smart Home Shade Integration in Trescott

Radio range planned before the hardware gets ordered

Learn more →

Blind Repair & Restring in Trescott

Fixed where it's worth fixing, and said plainly when it isn't

Learn more →

Shutter Repair in Trescott

Hinges, pins and tilt rods fixed, panel match confirmed first

Learn more →

Motorization Retrofit in Trescott

Existing shades powered where the headrail allows it

Learn more →

Outdoor Patio Shades in Trescott

Anchored into structure, guided at the edges, retracted early

Learn more →

Office Window Treatments in Trescott

Openness by elevation, controls within reach, one dye lot

Learn more →

Healthcare Window Treatments in Trescott

Cleanable, cordless, and documented in the submittal

Learn more →

Multifamily Window Treatments in Trescott

One spec per plan, attic stock ordered with every phase

Learn more →
Service Area

Where We Travel From Plainfield

Trescott is one of several Plainfield communities we serve. We measure and install across Plainfield, Hendricks County, and surrounding areas.

Common Questions

Trescott Window Treatment FAQ

Questions we hear most often from Trescott homeowners.

It matters more than the address does. Both builders are working primary plat PP-21-140 under one subdivision name, and each specifies its own window package, so casing detail and return depth can differ between the Drees and Pulte sections. That's enough to change whether an inside mount clears. We ask for the builder and the plan name at booking, Parkette or Buchanan or Alden or one of the others on the Drees side, so we arrive knowing which catalog we're working from rather than assuming Trescott means one thing.
Something that solves privacy before it solves glare. Trescott publishes its lot minimums, 80 by 125 feet in the R-3 portion and 62 by 125 in the R-4, and both are deep and narrow, so the long elevation faces the neighbor rather than the street. On a 62 foot lot the house next door is your primary shade source on that side. Top down bottom up cellular is usually the answer: cover the lower half for privacy, drop the top rail for daylight. Note that it all changes when the adjacent lot builds.
No, and Trescott is actually the strongest argument against skipping it. The phases plat incrementally, so a house finished three years ago has settled while the current phase is still green, and the subdivision will carry a rolling gradient of settlement for years. We three point measure width at the head, at the middle and at the sill, and height at both jambs plus the center. The factory takes the narrowest width and deducts 1/16 inch per side, so a quarter inch of out of square comes back to you as light gap at the wide end.
As a wall rather than as windows. The Drees plans at 3,000-plus sq ft can carry a two story family room volume, and the two problems there are reach and stack height. A shade parked at the top of tall glass takes real inches of daylight, so we mount above the header where the reveal allows it. Lutron flags larger light gaps on shades 120 inches and taller or at a 4:1 height to width ratio. Motorized operation usually earns its place at that height, and Hunter Douglas states PowerView battery life is about one year.
There's an association, and beyond that the public record is thin. The name and the fee aren't published, no architectural review procedure appears anywhere we could retrieve, and no recorded window covering rule turned up for Trescott at all. So we won't tell you street facing treatments have to be white, because nothing we can point to says that. Boards do occasionally adopt a street side color rule by resolution rather than by covenant. Ask yours, and if you get something in writing we'll specify to it.
The rear patio on a 125 foot deep lot with no canopy is the hardest exposure in the subdivision, because 167.3 acres of former farmland has nothing on it to cut the sun. Interior shades handle glare after the heat is already through the glass. An exterior solar shade or a retractable awning stops it earlier, and national installed awning pricing runs $1,000 to $6,000. Indianapolis averages an 85.2F high in July with a muggy stretch from May 25 to September 22, so the outdoor room is the one that benefits most.
Send a Message

Free Assessment in Trescott

Schedule a free, no-obligation window covering inspection. We respond promptly to all Trescott inquiries.

Service Area
Trescott, Plainfield, IN
Service area

Serving Plainfield and the surrounding area

Call NowGet Quote